HBM 250x550 Profi Vario bench vise for sale by auction
Velen-Ramsdorf
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€ 2100
≈ $ 2444
Germany, Velen-Ramsdorf
€ 329
≈ $ 382.90
Germany, Velen-Ramsdorf
€ 450
≈ $ 523.80
Germany, Velen-Ramsdorf
€ 100
≈ $ 116.40
Germany, Berlin
€ 250
≈ $ 291
Germany, Windhagen
€ 550
≈ $ 640.10
Germany, Heidelberg
2-axis LCD digital display system.
Longitudinal feed.
3-jaw chuck 125 mm.
4-jaw chuck 125 mm.
Clip.
4-way steel holder.
Drip tray
Hardened bed sheets.
Emergency stop.
Feed protection
Set of wheels.
Suitable tools.
Turning diameter over bed 250 mm
Turning diameter over support 140 mm
Turning length 550 mm
Speed 50 - 2000 rpm
Tip height 125 mm
Spindle bore 26 mm
Tailstock quill holder MK 2 MK
Tailstock quill stroke 65 mm
Connection voltage 230 V
Total power requirement 1.1 kW
Machine weight approx. 0.15 t
Space requirement approx. 1.3 x 0.6 x 1.3 m
Condition: never used / new (5)
2-Achsen-LCD-Digitalanzeigesystem.
Längsvorschub.
3-Backenfutter 125 mm.
4-Backenfutter 125 mm.
Aufspannplatte.
4-Wege-Stahlhalter.
Abtropfschale
Gehärtete Bettbahnen.
NotAus.
Futterschutz
Satz Räder.
Geeignete Werkzeuge.
Drehdurchmesser über Bett 250 mm
Drehdurchmesser über Support 140 mm
Drehlänge 550 mm
Drehzahl 50 - 2000 U/min
Spitzenhöhe 125 mm
Spindelbohrung 26 mm
Reitstock-Pinolenaufnahme MK 2 MK
Reitstockpinolenhub 65 mm
Anschlußspannung 230 V
Gesamtleistungsbedarf 1,1 kW
Maschinengewicht ca. 0,15 t
Raumbedarf ca. 1,3 x 0,6 x 1,3 m
Zustand: nie benutzt / neu (5)
Tischdrehmaschine mit Unterschrank 2-Achsen-LCD-Digitalanzeigesystem. Längsvorschub. 3-Backenfutter 125 mm. 4-Backenfutter 125 mm. Aufspannplatte. 4-Wege-Stahlhalter. Abtropfschale Gehärtete Bettbahnen. NotAus. Futterschutz Satz Räder. Geeignete Werkzeuge. Drehdurchmesser über Bett 250 mm Drehdurchmesser über Support 140 mm Drehlänge 550 mm Drehzahl 50 - 2000 U/min Spitzenhöhe 125 mm Spindelbohrung 26 mm Reitstock-Pinolenaufnahme MK 2 MK Reitstockpinolenhub 65 mm Anschlußspannung 230 V Gesamtleistungsbedarf 1,1 kW Maschinengewicht ca. 0,15 t Raumbedarf ca. 1,3 x 0,6 x 1,3 m Zustand: nie benutzt / neu (5)
Nettogewicht: 150
Breite: 60
Système d’affichage numérique LCD à 2 axes.
Alimentation longitudinale.
Mandrin à 3 mors 125 mm.
Mandrin à 4 mors 125 mm.
Capture.
Support en acier à 4 voies.
Égouttoir
Draps de lit durcis.
Arrêt d’urgence.
Protection des aliments
Jeu de roues.
Outils adaptés.
Diamètre de retournement au-dessus du lit 250 mm
Diamètre de retournement sur support 140 mm
Longueur de tournage 550 mm
Vitesse 50 - 2000 tr/min
Hauteur de la pointe 125 mm
Alésage de la broche 26 mm
Porte-piquants de poupée mobile MK 2 MK
Course de la poupée mobile 65 mm
Tension de raccordement 230 V
Puissance totale requise 1,1 kW
Poids de la machine env. 0,15 t
Encombrement : env. 1,3 x 0,6 x 1,3 m
État : jamais utilisé / neuf (5)
Sistema di visualizzazione digitale LCD a 2 assi.
Avanzamento longitudinale.
Mandrino a 3 griffe 125 mm.
Mandrino a 4 griffe 125 mm.
Morsetto.
Supporto in acciaio a 4 vie.
Raccogligocce
Lenzuola indurite.
Arresto di emergenza.
Protezione dell'alimentazione
Set di ruote.
Strumenti adatti.
Diametro di tornitura sul letto 250 mm
Diametro di tornitura sul supporto 140 mm
Lunghezza di tornitura 550 mm
Velocità 50 - 2000 giri/min
Altezza punta 125 mm
Foro mandrino 26 mm
Porta cannotto contropunta MK 2 MK
Corsa cannotto contropunta 65 mm
Tensione di collegamento 230 V
Potenza totale richiesta 1,1 kW
Peso della macchina circa 0,15 t
Ingombro circa 1,3 x 0,6 x 1,3 m
Condizione: mai usato / nuovo (5)
2-assig LCD digitaal displaysysteem.
Langsvoeding.
3-klauwplaat 125 mm.
4-klauwplaat 125 mm.
Knippen.
4-voudige stalen houder.
Lekbak
Geharde lakens.
Noodstop.
Bescherming tegen diervoeders
Set wielen.
Geschikt gereedschap.
Draaidiameter over bed 250 mm
Draaidiameter over steun 140 mm
Draailengte 550 mm
Toerental 50 - 2000 rpm
Hoogte punt 125 mm
Spindel boring 26 mm
Losse kop ganzenhouder MK 2 MK
Losse kop veer slag 65 mm
Aansluitspanning 230 V
Totaal benodigd vermogen 1,1 kW
Gewicht van de machine ca. 0,15 t
Benodigde ruimte: ca. 1,3 x 0,6 x 1,3 m
Staat: nooit gebruikt / nieuw (5)