VOE14577777 hydraulic control valve for Volvo EC360B excavator






If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts




















Product Overview
Work on embankments and batters is different from work on flat ground. On a slope, the machine's own weight is always trying to move it, and the hydraulic circuits are holding against gravity rather than just moving material. Any internal leakage becomes visible immediately: the boom creeps down while the operator sets a level, the arm drifts while the bucket is held against the face, and the swing does not stop where it was aimed. On flat ground this is an annoyance; on a batter it is rework and, in the wrong place, a risk.
The EC360B uses this distributor, reference VOE14577777, to divide pump flow among boom, arm, bucket, swing, travel and auxiliary. When spools and bores wear, pressure escapes between circuits and the machine loses the ability to hold position under load — which is precisely what slope work demands. This aftermarket assembly replaces the block complete with fresh internals set to Volvo B‑series values, so the worn unit comes off and the replacement fits the original port positions.
Core Advantages
1. Holds position against gravity, not just against soil
Slope work exposes leakage that flat ground hides. Restored spool sealing keeps the attachment where the lever left it.
2. Battery and batter work stops needing re‑cuts
Drift during setting out forces the operator to trim again. Fresh metering removes the correction from the pass.
3. Swing stops where it was aimed
Restored circuit isolation ends the overshoot that becomes dangerous when the machine is on an incline.
4. Combined functions hold pressure on gradients
Worn circuits pass oil when boom and arm work together. Renewed spools keep pressure through combined operation.
5. Complete assembly rather than section repairs
Where several circuits have drifted, one tested block settles them in a single stop instead of repeated visits.
Manufacturing & Quality Control
Spool and bore pairs are machined to print tolerance, matched by size, and hand‑run‑in until full‑stroke movement is smooth without binding. Assembled blocks are flow‑tested circuit by circuit with relief and compensator values logged against B‑series figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and crated on foam.
Frequently Asked Questions
Q1: How do I confirm VOE14577777 suits my EC360B?
A: Send a photo of the tag on the existing valve plus the machine serial number. The B‑series uses several references across builds and we verify before dispatch.
Q2: How do I test holding on a slope before replacing?
A: Hold a loaded bucket just clear of the ground with the lever stationary, ideally with oil at operating temperature, and watch for movement over a minute or two.
Q3: What symptoms indicate valve wear?
A: Creep on held loads, lost arm force against a face, inconsistent swing, and travel that reacts to bucket load.
Q4: Can my existing block be rebuilt?
A: If the casting is sound and has never been rebuilt, a kit may restore it. Where several circuits leak, a complete assembly is usually the better route. Photos help us judge.
Q5: What hydraulic servicing accompanies installation?
A: Flush the system, renew filters, clean the suction strainer, refill with specified oil, and verify relief settings before returning to slope work.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the crate before opening if damage is visible.