WK 06.16 EX other laboratory equipment
≈ US$11,490
Grenzach-Wyhlen6908 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Lörrach
Germany, Cologne
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Heidenheim
Germany, Location:frankfurt
Germany, Location:frankfurt
Germany, Location:frankfurt
Germany, Pullach
Germany, Location:frankfurt
Germany, Pullach
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
* Integrated filter monitoring: Differential pressure indicators for upstream and
* Air performance: 1,500 m³/h
Air volume flow: 1,500 m³/h
Final exam: 25.05.2021
* Particle sensor: Sartorius IFS4-1500RR-I
* Origin: Germany / Switzerland
The BDK WK 06.16 EX powder handling booth is a high-quality safety workbench for handling pharmaceutical powders in controlled environments. Equipped with HEPA filtration, differential pressure indicator, and a certified airflow system (1,500 m³/h), it meets the highest standards of product protection and user safety. The system consists of the parts shown in the images. It is used but technically in good condition and fully functional.
Advantages:
- Safe working: Protection against particle contamination during powder processing
- Certified & tested: WESCO-tested with valid cleanroom approval
- Integrated filter monitoring: Differential pressure indicators for pre- and HEPA filters
- Sustainability: Save resources and emissions through reuse
---------------------------------------------------------------
2. General functions:
- Safety cabinet for handling toxic or sensitive powders
- Explosion-proof design (EX) for use in sensitive areas
- Stainless steel housing with integrated lighting and rear wall extraction
- Air flow: 1,500m³/h
- HEPA filter system with differential pressure monitoring (MAGNEHELIC)
- Control unit with emergency stop, filter status, lighting switch
- Castors with brakes for flexible placement in the cleanroom
- Integrated particle sensor from Sartorius (IFS4-1500RR-I)
- Validatable for GMP/ISO classes
---------------------------------------------------------------
3. CO₂ savings:
By purchasing this used safety cabinet instead of a new one, you can save 1,000–1,200 kg CO₂ This roughly corresponds to the CO₂ emissions of a small car over approximately 8–10 months. A resource-saving decision in everyday laboratory work.
---------------------------------------------------------------
* Integrierte Filterüberwachung: Differenzdruckanzeigen für Vor- und
* Luftleistung: 1.500 m³/h
Luftvolumenstrom: 1.500 m³/h
Letzte Prüfung: 25.05.2021
* Partikelsensor: Sartorius IFS4-1500RR-I
* Herkunft: Deutschland / Schweiz
Die BDK WK 06.16 EX Pulver-Handhabungskabine ist eine hochwertige Sicherheitsarbeitsbank für den Umgang mit pharmazeutischen Pulvern in kontrollierten Umgebungen. Ausgestattet mit HEPA-Filtration, Differenzdruckanzeige und geprüftem Luftstromsystem (1.500 m³/h), erfüllt sie höchste Anforderungen an Produktschutz und Anwendersicherheit. Die Anlage besteht aus den Teilen, die in den Bildern zu sehen sind. Sie ist gebraucht, jedoch technisch in gutem Zustand und voll funktionsfähig.
Vorteile:
- Sicheres Arbeiten: Schutz vor Partikelkontamination bei Pulververarbeitung
- Zertifiziert & geprüft: WESCO-geprüft mit gültiger Reinraumabnahme
- Integrierte Filterüberwachung: Differenzdruckanzeigen für Vor- und HEPA-Filter
- Nachhaltigkeit: Durch Wiederverwendung Ressourcen und Emissionen sparen
---------------------------------------------------------------
2. Allgemeine Funktionen:
- Sicherheitswerkbank für den Umgang mit toxischen oder sensiblen Pulvern
- Explosionsgeschützte Ausführung (EX) für den Einsatz in sensiblen Zonen
- Edelstahlgehäuse mit integrierter Beleuchtung und Rückwandabsaugung
- Luftleistung: 1.500 m³/h
- HEPA-Filtersystem mit Differenzdrucküberwachung (MAGNEHELIC)
- Bedieneinheit mit Not-Aus, Filterstatus, Beleuchtungsschalter
- Rollen mit Feststellern für flexible Platzierung im Reinraum
- Integrierter Partikelsensor von Sartorius (IFS4-1500RR-I)
- Validierbar für GMP/ISO-Klassen
---------------------------------------------------------------
3. CO₂-Einsparung:
Durch den Erwerb dieser gebrauchten Sicherheitswerkbank anstelle eines Neugeräts können etwa 1.000–1.200 kg CO₂ eingespart werden. Dies entspricht in etwa dem CO₂-Ausstoß eines Kleinwagens über ca. 8–10 Monate. Eine ressourcenschonende Entscheidung im Laboralltag.
---------------------------------------------------------------