New Turchi 300F pile driver
Tallinn7145 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Estonia, Tallinn
4.4 m
Estonia, Tallinn
Estonia, Tallinn
Estonia, Tallin
3.5 m
Estonia, Tallinn
Estonia, Tallinn
Estonia, Tallinn
4.4 m
Estonia, Tallinn
Estonia, Tallinn
3.5 m
Estonia, Tallinn
Estonia, Tallinn
4.4 m
Estonia, Pärnu
Estonia, Tallinn
Estonia, Tallin
4.4 m
Italy, Parma
Mass in working condition, 4500 kg
Doosan D 18 engine (3 cylinders) \ Yanmar 4TNV88 (4 cylinders)
Emmision control stage 3/5
The power is 34,4 kW - 45 kW
The volume of the fuel tank is 56 liters
Fuel consumption 5-6 l / h
The volume of the hydraulic tank is 140 L
Hammer impact energy 1200 J.
Frequency of blows, blows / min. 1500
The working weight of the hammer is 450 kg
Productivity of the hydraulic system pump is 70-100 l/min.
The pressure in the hydraulic system is 180 bar.
Dimensions (L x W x H), mm 2160 x 2300 x 2600
Working functions with hydraulic drive:
- Lifting the hammer;
- Hammer start;
- Raising / lowering the mast;
- Tilt forward-backward and right-left;
- Removing the mast;
- Management of caterpillars
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Il nuovo Turchi 300F
Massa in condizioni operative, 4500 kg
Motore Doosan D 18 (3 cilindri) \ Yanmar 4TNV88 (4 cilindri)
Controllo delle emissioni fase 3/5
La potenza è di 34,4 kW - 45 kW
Il volume del serbatoio carburante è di 56 litri
Consumo di carburante 5-6 l / h
Il volume del serbatoio idraulico è di 140 L
Energia d'impatto del martello 1200 J.
Frequenza dei colpi, colpi/min. 1500
Il peso operativo del martello è di 450 kg
La produttività della pompa del sistema idraulico è di 70-100 l/min.
La pressione nel sistema idraulico è di 180 bar.
Dimensioni (L x P x A), mm 2160 x 2300 x 2600
Funzioni di lavoro con azionamento idraulico:
- Sollevamento del martello;
- Avvio del martello;
- Sollevamento/abbassamento dell'albero;
- Inclinazione avanti-indietro e destra-sinistra;
- Rimozione dell'albero;
- Gestione dei cingoli
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Uus Turchi 300F
Töökorras mass, 4500 kg
Doosan D 18 mootor (3 silindrit) \ Yanmar 4TNV88 (4 silindrit)
Heitkoguste kontrolli etapp 3/5
Võimsus on 34,4 kW - 45 kW
Kütusepaagi maht on 56 liitrit
Kütusekulu 5-6 l / h
Hüdraulikamahuti maht 140 l
Vasara löögienergia 1200 J.
Löökide sagedus, lööki/min. 1500
Vasara töömass 450 kg
Hüdraulikasüsteemi pumba tootlikkus 70–100 l/min.
Hüdraulikasüsteemi rõhk 180 bar.
Mõõtmed (P x L x K), mm 2160 x 2300 x 2600
Hüdraulilise ajamiga töötamise funktsioonid:
- Vasara tõstmine;
- Vasara käivitamine;
- Masti tõstmine/langetamine;
- Kaldamine ette-taha ja paremale-vasakule;
- Masti eemaldamine;
- Roomikute juhtimine